ALAMO EMF SOLUTIONS

What is EMF

EMF stands for Electro Magneitc Fields. There are three main types of EMF fields; electric, magnetic and radiation.

Electromagnetic fields (EMFs) are a type of electromagnetic radiation emitted by almost everything electrical or electronic in our modern world.  EMF sources include power lines, transformers, electric panels, electrical wiring in homes, computers, lights, clocks, appliances, televisions, hairdryers, cell phones, cordless phones, microwave ovens, Wi-Fi, wireless routers, wireless computer hardware, cell towers, TV/radio broadcast towers, Smart Meters, etc., etc.

Visible light (like that from the sun) is also a type of electromagnetic radiation.  The term “electromagnetic field” or “EMF” is usually used to refer to all the electromagnetic radiation frequencies that are lower (slower) than visible light.  Scientists also refer to the EMF frequencies as “non-ionizing radiation”, which means that EMFs are not strong enough to “ionize” molecules

In contrast, the electromagnetic radiation frequencies that are higher (faster) than visible light are called “ionizing radiation” because they have enough energy to disrupt or “ionize” molecules, and thus are potentially very dangerous to biological organisms.  Ionizing radiation includes X-rays and the various nuclear radiations, which are clearly known and accepted as being hazardous to human health like radioactive material such as plutonium, uranium, radium, radon gas or gamma rays etc.

 Can EMFs Really Affect Our Health?

In the beginning, scientists believed that EMF wireless radiation (non-ionizing radiation) could not affect human health because EMFs cannot ionize molecules in the way that X-rays and nuclear radiation can.  But scientists then discovered that EMFs could indeed affect human health by heating up the tissues within our bodies — similar to the way a microwave oven warms up food.  So today, most of the official EMF safety standards, such as the FCC, the bio Initiative Report, Building Biology Institute have set exposure limits for the general public and are designed to protect our bodies from these heating effects.

But a growing number of studies are reporting definite biological effects from EMF exposures that are well below the FCC limits and similar “thermal” standards for EMF safety.  It is interesting to note that the FCC actually has a second, much stricter, set of EMF “safety” standards in place also.  These other FCC limits address important concerns about EMFs at levels well below the “tissue heating” levels — but not for us humans, for our electronics!

“Electromagnetic interference” or “EMI” is a critical concern for electronic devices and systems, because EMFs can cause interference with the operation and function of sensitive electronics.  For example, the FCC takes great care in controlling the assignment of EMF frequencies and power outputs for radio stations, television stations, cell towers and all wireless devices, to make sure that the EMF signal from one station or device does not overlap and interfere with the EMF signal or the proper working of another device or station.

Similar to the way that relatively low levels of EMFs can create troublesome interference problems for sensitive electronics, the biological research increasingly suggests that similarly low levels of EMFs — exposures significantly below that needed to heat our body tissues — can interact, influence and interfere with the sensitive “bio-electronics” within our own cells, tissues, brains and bodies.

For example, scientists have discovered that human beings — and almost all animals from whales to worms — have magnetic sensing tissues that can sense the natural magnetic field of the planet.  Depending on the species, this magnetic sense is used to orient itself, migrate over vast distances, or even to help regulate important biological functions such as the circadian rhythms for brain activity, digestion and sleep.

In fact, studies show that the human pineal gland can sense daily changes in the earth’s magnetic field, and uses this information to help regulate our wake/sleep cycles.  Researchers have shown that artificial magnetic fields — well below the heating threshold, like those from power lines — can cause a kind of biological EMI (Electro Magnetic Interference) and suppress the secretion of melatonin from the pineal gland at night.  This is important because melatonin is the main hormone that controls our sleep cycle, as well as a potent natural anti-oxidant that fights cancer within our bodies.

 What Kinds of EMFs Are a Concern?

There are three main categories of electromagnetic fields (EMFs) to be concerned about.  These three main types are called magnetic fields, electric fields and radio frequency (RF) fields.  All three types have been linked to important biological effects in the scientific research studies.

Electric fields have also been linked to important biological effects, but have been studied less in the research.  Anecdotally, they are often involved when people feel “sensitive” to electromagnetic sources.  Electric fields are usually caused by electrical wiring in walls, by nearby power cords for lamps and other devices, and sometimes from overhead power lines.  Electric fields induce measurable voltages onto the skin, which are easily detected with a Body Voltage Meter.

Magnetic fields are the EMF component most often linked to serious health effects — such as childhood leukemia and other cancers — in the research studies.  Common sources include power lines, electrical wiring, lights, appliances and most other electrical devices.  (“ELF” or “extremely-low-frequency” is the scientific name for the EMF frequency range that includes the 60 cycles-per-second electricity commonly used in the US and Canada.)

Radio frequency (RF) Fields (including microwaves) are commonly used in wireless communications and broadcasting.  They have been linked to several kinds of cancer tumors and other health problems.  RF fields are emitted from cell towers, cell phones, cordless phones, TV/radio broadcast towers, Smart Meters, Wi-Fi, wireless computers and components, baby monitors, microwave ovens, radar, etc.

Dirty electricity Dirty electricity is erratic spikes and surges of electrical energy traveling along power lines and building wiring where only standard 50/60-Hertz (cycles per second) AC electricity should be. Also called electrical noise, line noise, and power line EMI (Electro Magnetic Interruption), it is one fast-growing source of electro-pollution in homes, schools, and businesses today.

How Dirty Electricity Is Created

Dirty electricity is created by many electronics, appliances, energy-efficient lights, and other devices that run on electricity. It is more common now than ever before. Why? Because many modern devices no longer use standard AC electricity “as is.” Instead, they must “manipulate” electrical current in one way or another in order to operate.

For example, many electrical devices today must convert standard 50/60-Hertz (cycles per second) AC electricity (alternating current) into other forms of electricity — such as low voltage direct current (DC) or higher frequency AC — in order to operate. And many devices now draw power from wiring intermittently, in short burst, rather than continuously. They do this by turning the flow of power to a device “on” and “off” repeatedly, often thousands of times per second. These processes interrupt the smooth flow of standard 50/60-Hertz (cycles per second) AC electricity, which creates harmonics and erratic surges and spikes of electrical energy (i.e., voltage transients) that have a frequency into the thousands of Hertz (cycles per second).

Once created, this unusable dirty electricity spreads throughout a house or building and even to other buildings via wiring and power lines. As it travels, it radiates potentially harmful electromagnetic fields (EMF) into living and working environments.

Common Sources of Dirty Electricity

• Light dimmer switches
• Fluorescent light bulbs and tubes
• Computers and laptops
• Printers and scanners
• Televisions
• Music Entertainment Systems
• Video game systems
• Cordless phone systems

• SMART meters and appliances
• Wi-Fi routers and modems
• Battery charging devices for cell phones, tablets, etc.
• Microwave Ovens
• Blenders and mixers
• Hair Dryers
• Multi-Speed Fans
• Solar power systems

What is an EMF Assessment

An EMF (Electromagnetic Fields) assessment is a survey to detect the different EMF sources in a residential or commercial building, etc. Using my training and professional meters I check the interior and exterior of a building for the main types of EMF radiation (Wireless, Electric, Magnetic Radiation, Dirty Electricity, bad light bulbs etc.). Each field requires a separate inspection at each room selected for an assessment with a meter designed specifically to detect a particular electromagnetic field. I detect and measure the EMFs listed below, provide a risk assessment and provide solutions to reduce or eliminate them :

1. Radio Frequency & Microwave Radiation – baby monitors, security systems, cell towers, radar, smart meters, WiFi, Bluetooth, printers, computers, and cordless phones., cell phones, microwaves ovens, refrigerators and other appliances
   
2. 5G low band, mid band, high band test
   
3. AC Electric Fields –
   Home wiring, appliances, computers and other electronics
4. Body Voltage – AC Electric fields charge on the human body at bedroom and another room. This test is a more accurate way of determining the effects of electric fields on the human body.
5. AC Magnetic Fields – Power lines, appliances, in house wiring errors, plumbing, electrical panels, electrical outlets, etc.
6. Dirty Electricity – light bulbs, computers, tvs, pool pumps, HVAC variable speed motors, solar inverters, battery chargers and other electronic devices etc.
7. Contact Current –
   This test is to find electrical current or amperage that could be the result of you touching on the metal casing or handles of some of your appliances like a washing machine, electric drier, refrigerator, electric stove or oven, metal faucet handles in sinks, bath tubs, showers etc., etc. If the conditions are right you could get an electrical shock that you could feel. If you have metal water pipes in your house there could be electricity on those pipes and everywhere they go to. Same with gas pipes. Contact current can also be measured when a person is using a grounding mat etc
8. Stray Currents – on TV cables, gas and water pipes due to wiring errors and code violations etc.
9. Light Bulb Testing — Lighting is very important. It can improve your life or cause problems like eye strain, circadian rhythm interference, insomnia, headaches, mood swings etc. Good light bulbs should have a balanced light spectrum closer to natural light. It should be bright enough for a particular space and its function. I will test some light bulbs and your computer screen to see if they are safe. Test includes color temperature, brightness, color index, flicker, blue light, dirty electricity etc.
10. This also includes informing you the home or business owner regarding EMFs and answering any questions you might have.
11. Examples of Properties Where EMF Assessments and Remediations Can Be Done: Residential:
12. Houses (3 _ 5 hours depending on size)
13. Real estate pre-purchase, pre-lease or pre-rental (1-3 hours)
14. Post remodeling & post remediation properties (1-2 hours)
15. Raw land (time depends on size) Commercial:
16. Single story office suites & buildings
17. Health clinics
18. Doctors’ offices
19. Chiropractors’ offices
20. Massage therapists’ centers
21. Schools, offices, laboratories
22. Gyms

EMF Assessment services

1. Assessment for an average sized home or office is $400.00. Areas covered are those where you spend most of your time at; bedrooms, home office, living room et. It includes basic education on the EMFs and health effects /risks, answering your questions, showing you how to use your meters (if you have any), simple remediations that could be quickly done – Some EMF remediations can be put in place during the assessment. Others, such as when an electrical or plumbing repair is needed that involves code violations would require experienced and licensed contractors. These require a second visit with a certified electrician or plumber to fix and to verify the issue is repaired. The EMF assessment includes a report summary with findings and remediation recommendations. It also includes a packet of EMF information, a list of links for educational websites and those that carry measuring meters, protective clothing, shielding materials, safe light bulbs, shielded cords, protective screens and much more. Usual time to do an assessment could be from 3 to 4 hours and sometimes longer.
2. If a detailed written report with exact reading numbers is needed, add $150.00 – There is a lot more time involved in documenting the data and writing a report.
3. If you want do the EMF assessment with me and you write the meter readings as I call them off, the donation is $300.00. I will also give you the remediation suggestions.
4. If all you need is for me to do the test and tell you what needs fixing and how and you do not want a report summary, the donation is $300.00
5. If you are in a difficult financial situation and can’t afford it but you need to have an EMF assessment for yourself and family, call me to work something out.
6. If a home is more than 2500 square feet call me to determine what areas or rooms you you want me to do the assessment in. That way I can know if I need to charge you more or not.
7. Beyond 20 miles from our office in the San Antonio, Texas 78209 zip code there is a travel fee: call for a quote.
8. if you have sensitivities to EMFs or EHS (Electro Hypersensitivity Syndrome) or as it is now officially called, EMR Syndrome (Electro Magnetic Radiation Syndrome) and you would like someone to talk to regarding your situation because people do not understand you or you need some tips on how to improve the situation etc., call me. There is no charge.
9. If you are having a situation with the local power utility company regarding a smart meter etc. and you would like someone to talk to get help or tips call me. maybe I can help. There is no charge.
10. Winter special: $25.00 off total bill.

EMF Solutions 1. Our EMF Solutions enable many clients to feel better instantly and sleep better that night. 2. Some EMF Solutions can be put in place during the assessment at little or no cost. 3. Other EMF Solutions such as when electrical or plumbing repair is required we can direct you to experienced and licensed contractors that are EMF aware. These require a second visit with the company of a certified electrician or plumber to fix code violations and for verification the issue is repaired.

Call now for a free 15 minute consultation and to find out what EMF Solutions are right for you: 210-429-8484

Special Considerations for the sick If you are sick and have been to the doctor or specialists and your illness is still not cured and you would like to have an EMF assessment in your residence but cannot afford it, I will do it for free. I will also help you remediate some of the issues found for free.

Legal Disclaimer

Alamo EMF Solutions does not practice medicine. The information on this website is for educational purposes. There is an overwhelming amount of documented evidence from reputable organizations, doctors, research scientists, physicists regarding the effects of EMF on the human body and animals that is easily available on line and should be consulted: The BioInitiative 2012 Report has been prepared by 29 authors from ten countries: https://bioinitiative.org/
Dr. Martin Pall, PhD, Professor Emeritus of Biochemistry and Basic Medical Sciences at Washington State University, has found that calcium channels in cell membranes are adversely affected by exposure to even low levels of RF energy. Dr. Pall wrote a seminal work on 5G, entitled, “5G: Great risk for EU, U.S. and International Health! Compelling Evidence for Eight Distinct Types of Great Harm Caused by Electromagnetic Field (EMF) Exposures and the Mechanism that Causes Them”. It is available online at: https://peaceinspace.blogs.com/files/5g-emf-hazards–dr-martin-l.-pall–eu-emf2018- 6-11us3.pdf.

My viewpoint Unfortunately I cannot recommend any doctor in the San Antonio area as I am not aware of any that is trained on EMF and their symptoms. It is very likely that people that have EMF symptoms are going to their doctors who treat them without knowing the sources of the symptoms and do the usual of prescribing drugs to treat them. This would compound the condition by adding the side effects of the drugs resulting in a downward spiral for the patient.

.